“Save the planet, (learn how to) plant a tree”

I like catchy memes as much as the next person. They’re easily memorized and passed on. But “Save the planet, plant a tree” has always bugged me for two reasons. First, and probably most importantly, this simplistic mantra absolves people of doing MORE to improve our environment. It’s a “one and done” approach:  “Hey, I planted a tree today, so I’ve done my part.” That’s hardly a responsible way to live in a world where climate change is a reality, not a theory. Planting trees (and other woody plants) needs to become part of a personal ethic dedicated to improving our shared environment, and that includes reducing our carbon footprint in MANY ways.

No and no.

Second, and more germane to this blog, is that most people don’t know how to plant trees (and that includes an awful lot of professionals who should know better). Planting trees properly requires an understanding of woody plant physiology and applied soil sciences. Otherwise, newly planted trees are likely to die due to one or more problems:

  • Poor plant species selection
    • Mature size too large for site.
    • Species not adapted to urbanized conditions. This includes insistence on using native species whether or not they tolerate environmental conditions far different from their natural habitat.
Gaultheria shallon does well in the forest subcanopy – not so well in urban settings

  • Poor/improper soil preparation
    • Working amendments into the soil before, during, or after planting. Your goal is to keep a texturally uniform soil environment.
    • Digging a hole before seeing what the roots look like. It’s like buying a pair of shoes without regard to their size.
The reality of tree roots: you can’t dig a hole until you can see what goes in it.

  • Poor quality roots
    • Most roots found in containerized or B&B trees are flawed through poor production practices. If you are using bare root stock, you don’t have to worry about this problem.
    • Can’t see the roots? Well, that leads to the next problem.
You can’t see root problems unless you take it all off.

  • Improper root preparation
    • No removal of burlap, clay, soilless media, or whatever else will isolate the roots from its future soil environment. Take it all off.
    • No correction of root flaws. Woody roots don’t miraculously grow the right direction when they are circling inward. They are woody; it’s like trying to straighten a bentwood chair.
Just try to straighten those circling, woody roots.

  • Improper planting
    • Planting at the wrong time of year. It’s best to plant trees in the fall, when mild temperatures and adequate rainfall will support root establishment and not stress the crown.
    • Not digging the hole to mirror the root system, especially digging too deep.
    • Failing to place the root crown at grade (which means the top of the root crown should be visible at soil level). Look at forest trees if you are not familiar with what a root crown looks like.
    • Stomping or pressing the soil around the roots. That just eliminates the air space in soil pores.
    • Adding “stuff” like transplant fertilizers, biostimulants, etc. They are not needed and you risk creating nutrient imbalances when you add “stuff.”
The tape marks where the burlap ended – a good 10″ above the root crown.

  • Poor aftercare and long-term management
    • Failing to add arborist wood chips as a mulch on top of the planting area. Regardless of where you live, natural woody material as a mulch is critical for root, soil, and mycorrhizal health.
    • Failing to irrigate throughout the establishment period and seasonally as needed. Trees will continue to grow above and below ground, and without a similar increase in irrigation the trees will suffer chronic drought stress during hot and dry summers.
    • Adding fertilizers of any sort without a soil test to guide additions. Trees recycle most of their nutrients; don’t add anything unless you have a documented reason for doing so.
There is nothing better for roots, soil, and beneficial microbes than fresh arborist chips.

That’s a lot to think about when you are planting a tree – but when you understand the science behind WHY these actions should be avoided, then you can devise a better plan for planting. And if it all seems to be too much, I have created a twelve-step planting plan that might be useful. Please feel free to share it widely!

Pruning Basics

As we head into Fall garden routines and leaves start to turn color, the smell and feel of the Fall weather is in the air. Winter is just around the corner and with those horticultural routines comes the urge to prune stuff . Both fruit producing and shade producing trees often get a hair cut during fall and winter months, herbaceous perennials are often cut back in the fall after bloom and before their winter rest so it seems a good time to blog about pruning before you get the urge!   After years of pruning demonstrations for Master Gardeners and the public I have noted a common thread in how gardeners think about pruning. Pruning is a mysterious process. How we take that tangled mess of a plant (tree) and fix it? What do we prune? And the less frequently asked question: What do we not prune? To add confusion, some plants such as roses seem to have their own pruning “culture”.  In this blog post I will cover the basic principles that apply to pruning all plants and then expand into specifics in upcoming blogs.

“Lion tailing” is a form of pruning that removes branches from the interior of a tree leaving tufts of foliage at the ends of branches. This kind of pruning is destructive to oak trees as it lets too much light permeate the crown of the tree

Plants don’t want to be pruned!
The first point is that no plant wants to be pruned. Gardeners prune plants because they think it is necessary for horticultural, aesthetic or safety purposes. Gardeners should temper their pruning by understanding plant responses that result from pruning. Generally plants don’t respond much when dead portions are pruned away. In some cases removing large dead portions of a plant will allow more light to enter and some response can occur, e.g., damage to portions of a plant not used to such sunlight intensity. So even a dead plant part may be doing something that you don’t understand. Also dead wood or dead plant parts may be part of some other organism’s home. Owls and other birds nest in cavities, some kinds of bumble bees will reproduce in old flower stalks of desert plants such as Nolina, etc. So dead plant parts are not always useless. If you are pretty sure that nobody else is using dead material go ahead and remove it if bothers your garden aesthetic.

This Ancient sycamore is falling apart with dead wood as younger stems continue to grow. The deadwood provides habitat for animals and in this location poses no risk to people so there is little reason to remove it.

There are two physiological responses to pruning

The two principles of pruning can be used to train plants and in the case of trees, produce a strong architecture that will not easily fail (drop branches). To achieve pruning goals two kinds of pruning cuts are used: the heading cut and the thinning cut. Heading cuts are often made in the middle of stems and do not have a branch that can take over the terminal role of the removed portion. Heading cuts are often used to reduce size or volume of plants. Thinning cuts remove branches at their origin. If thinning cuts are not too large and don’t allow excessive light into a canopy the plant will not respond by invigorating buds. Thinning cuts are used to maintain the natural form of a plant but can be overdone. Over-thinning results in plants that have so much light now entering that buds are invigorated and new shoot form in overwhelming and unnatural locations just as when heading cuts are made. Excessive use of thinning cuts can also produce trees that are “lion-tailed” where all the leaves occur at the end of Pom Pom branches. Remember from a tree or shrub point of view they don’t need or want to be pruned.

A thinning cut removes a branch at its attachment.
A heading cut removes a branch or stem without a side branch to assume its dominant role in the plant

Back to plant responses. There are two responses that most plants have to pruning. When living portions are pruned the remaining portions are then invigorated. This implies that dormant or “latent” buds will grow that would not ordinarily grow so plants will produce flowers or foliage in new places. In this way we can re-direct the growth of plants to achieve pruning goals we may have. This is how we can pleach a tree to grow flat along a wall or produce topiary shapes with shrubs. These kinds of pruning that dramatically alter form of a plant will require successive and significant pruning to maintain the altered form or shape. Not all plants can tolerate this and even those that do can be subject to sunburn or other processes that cause them injury. The second common response to pruning is that the more a plant is pruned, the less it will grow—pruning is a growth reducing practice. Even though buds are invigorated through pruning they can’t make up for the lost leaves and buds taken away without utilizing stored energy. The overall effect of having leaves removed is to slow the growth of the entire plant. Pruning when used as high art results in Bonsai plants that are really stunted individuals with highly stylized forms.

These plane trees along lake Como in Italy have been pollarded to dwarf them. Removing branches each year stunts the tree and limits its growth in a sustainable way. Pollarding is a style of pruning that requires continued removal of branches each year.

Pruning devigorates plants

Since pruning removes leaves and buds (which make more leaves) it is a devigorating process. You are taking away a plant’s ability to harvest light energy and convert carbon dioxide and water to sugar. All this happens in leaves. The fewer leaves a plant has the less sugar it can accumulate and then the less work it can do in terms of growing. On old or slow growing plants pruning removes energy needed for growth and also the energy needed to make secondary metabolites or chemicals which fight insect and pathogen attacks. This is why old trees pruned hard often died not soon after or become susceptible to pathogens they may have been able to fight before the pruning happened. Whenever you prune something think about how you are taking away photosynthate and what it might mean to the plant.

Fruit Trees and Roses

We have to prune fruit trees to make them fruitful? NO. Fruit trees produce lots of fruit when they are not pruned. The goal of pruning fruit trees is to modify trees so fruit is:
• in an easy to pick location,
• so there is less of it
• and so the fruit that forms is of higher quality.
An unpruned tree will make the most fruit but it may not be the quality or size you desire or where you want it in terms of picking height.

The same goes for roses. There are many pruning schemes for roses, but the most flowers will be found on the least pruned shrubs. Flower size is mostly determined by genetics. Shrubs that are severely pruned will have fewer flowers than their unpruned counterparts.

Roses have may pruning paradigms but the basic rules of pruning apply the more you prune it the less it will grow. The less you prune it the more flowers you will have.

Pruning and Disease

Pruning to remove diseased parts is often cited as a common garden practice. With some diseases like cankers and blights it is a good idea to prune out infected portions before they make spores or other inoculum to further infect the rest of the plant. In most cases it is important to prune well beyond the diseased portion so all of an infection is removed. Some diseases are “systemic” such as wilt diseases and while pruning will remove a dying portion it will not rid the plant of the infection. It is always best to identify the cause of disease even before pruning it from the plant.  As we will learn in an upcoming blog I rarely recommend sterilizing your pruning equipment with disinfectants.  A stiff brush and water is all that is needed when removing most diseased plant parts.

Pruning is a useful tool for gardeners. To get the most from the practice it should be conducted with knowledge of the effects it will have on the plant that is being pruned. This is quite variable and in some cases pruning is really contraindicated. While some plants like herbaceous perennials will be pruned to the ground either by the gardener or by frost, others maintain above ground architecture and pruning choices make permanent impact to many woody plants. In the next blog I will write about pruning young trees to create strong structure.

This Maten tree (Maytenus boaria) has a canker disease. A good reason to prune out branches, but in this case pruning may have been delayed too long as the tree will be quite disfigured after removing all the affected branches.

References:

Downer, J., Uchida, J.Y., Elliot, M., and D.R. Hodel. 2009. Lethal palm diseases common in the United States. HortTechnology: 19:710-716.

Downer, A.J., A.D. Howell, and J. Karlik. 2015. Effect of pruning on eight landscape rose cultivars grown outdoors Acta Horticulturae 1064:253-255

Chalker-Scott, L. and A. J. Downer. 2018. Garden myth busting for Extension Educators: Reviewing the Literature on Landscape Trees. J. of the NACAA 11(2). https://www.nacaa.com/journal/index.php?jid=885

Everything is chemicals: the myth and fear of “chemical-free” gardening

“Chemical-free” – a term I’ve seen several times attributed to many products, especially food and produce at farmers markets and even in gardening circles these days.  This term is often misused to describe plants grown without the use of any pesticide, either conventional or organic. I have my thoughts that I’ll share later on that subject but first let’s talk about this “chemical-free” that gardeners, farmers, and others use and why its not only a myth, but a dangerous one at that.

Ain’t such a thing as “chemical-free” anything

At face value, the term “chemical-free” would literally mean that whatever the label is applied to contains no chemicals.  That the entire item, whether it be animal, vegetable, or mineral is devoid of any and all chemicals.  Factually this can never, ever be true.  Everything that exists is made of chemicals.  Oxygen, water, carbon dioxide, and any simple molecule, by definition, is a chemical.  Plants and animals are organized structures filled with complex chemicals.  Even you and I, as humans, are walking, talking bags of chemicals.  The air we breathe, the food we eat, and the water we drink are all composed of a great mixture of chemicals.  The use of the term “chemical-free” to describe anything is uninformed at best, and intellectually dishonest at worst. But a bigger problem, as we’ll discuss later, is that using the term can cause confusion and even fear of things as simple as food and as complex as science and medicine. 

Expert reveals how even natural foods contain chemicals | Daily Mail Online
The “ingredient list” of a peach.
Source

What most people intend to say when they use the term “chemical-free” in relation to plants or produce is that they are produced without use of pesticides or conventional “chemical” fertilizers.  Therefore, a better term to use would be “pesticide-free” instead of “chemical-free” as it more accurately represents the situation.  Many may ask why the term “organic” or “organically grown” couldn’t also be used to describe “pesticide-free” plants.  And while those terms would be accurate, organic production can involve the use of organic pesticides that are derived from natural sources such as plants, bacteria, or natural minerals.  Natural sources of fertility for plants, such as composts and even soil itself, are all composed of a myriad of chemical substances.  Plants don’t differentiate between the chemicals they uptake from compost or soil and those from fertilizers.  To plants, nitrogen is nitrogen and phosphorous is phosphorous no matter where it comes from.

For some clarification on what different growing and production terms like these mean, check out this lecture I gave for the Oregon Farmers Market Association earlier this year.

While many have a strong opinion on the use of pesticides and fertilizers, I’ll state here that the use of any pesticide, organic or conventional, must follow the label on the container by law. And the use of any pesticide according to the label instructions means that the use of that pesticide should present a minimal risk to the health of the applicator, consumer, off-target species, and the environment.  And don’t use any home remedy recipes or products that aren’t labeled (or at least scientifically researched) for use as a pesticide.  In most cases these remedies aren’t effective, in some cases they can be more dangerous to human health or the environment than the pesticide they are trying to replace.  And applying them as a pesticide could also be illegal. 

Reading Pesticide Labels - Pests in the Urban Landscape - ANR Blogs
Pesticide label signal words that denote relative toxicity of a given pesticide.

Any gardener or producer, whether they use pesticides or not, should also be practicing Integrated Pest Management (IPM) to decrease or mitigate the effects of insect and disease pests on their plants.  For those using pesticides, use of the least toxic pesticide that offers control of the problem should be the last step in a series of steps to avoid damage from pests after a threshold of damage has been reached.  For those who don’t use pesticides, IPM should be a central practice in their gardening or farming practice.  Unfortunately, the tradeoff for not using pesticides is often time and labor, so successful “pesticide-free” growing often involves more work (and for produce at the market or grocery store, a higher price).  I have seen some gardeners and farmers who don’t use pesticides and don’t make an effort to practice IPM, taking whatever plants or produce mother nature and her children deal them.  I’ve sometimes referred to this type of growing as “organic by neglect” as I see insect and disease riddled produce harvested and even sold at local farmers markets.

Why does it matter?

“So what if I use the term ‘chemical-free’?  It doesn’t hurt anyone,” you may say.  While this may seem the case, the use of the term “chemical-free” has risen as a result of what many call chemophobia, effects that reach far beyond the garden or the farmers market.  This kind of thinking leads to the incorrect notion that all “natural” remedies are safe and all “synthetic” remedies are dangerous.  True, many chemicals do pose a risk to human, plant, animal, and environmental health but many do not.  Just like not all natural substances are safe.  Poison ivy, anthrax, botulinum, and cyanide are all natural and cause everything from a skin rash to instant death (sometimes I get poison ivy so bad I wish for instant death).

This chemophobia can lead to, or is a symptom of, a broader mistrust of science, the scientific process, and modern medicine that has developed in society in the last few decades.  Many attribute this to an anti-intellectual or anti-science stance in society resulting from mistrust or political saber-rattling against universities, education in general, science/scientists, “big Pharma”, “big Agriculture”, and others.  As a result, the news is filled with people who eschew well-researched scientific advances that have been proven safe and instead turn to home remedies that have no such guarantee of either effectiveness or safety.  The results can be worse than the effects of the proven advance the person was trying to avoid. 

While the outcomes of “chemical free” gardening might not have such dire consequences as immediate death, the misuse of such terms can feed into a cycle of anti-science cause and effect, serving as both a cause and a symptom of mistrust of science and the scientific process.  While everyone has a right to choose whether or not they use pesticides (or any other scientific advancement), making such decisions from a place of knowledge instead of fear is paramount for success and continued advancement. 

Sources and further reading:

https://www.columbiasciencereview.com/blog/debunking-the-myth-of-100-chemical-free-slogans

https://www.sciencedirect.com/science/article/pii/S0278691520302787

https://www.canr.msu.edu/news/chemophobia-fearing-chemicals

https://www.businessinsider.com/what-chemicals-are-in-an-all-natural-banana-2017-6

Xeriscape – landscaping whose time has come.

With drought conditions or lower than average precipitation becoming more widespread across the country, it’s time to revisit the principles of xeriscape gardening. Let’s take a look at the “classic” principles and we’ll update them, Garden Professor style.
Note: If you’re growing food crops to supply your table not all of these principles will apply. Some will, e.g mulching, and some won’t. This blog post is focused on ornamental landscaping.

James Steakley/Creative Commons


SO WHERE DID IT ALL BEGIN?

As an “official” landscaping technique xeriscaping seems to have begun in the early 80’s. Denver Water, the largest and oldest public water utility in Denver, Colorado, coined the term xeriscape in 1981 by combining “landscape” with the Greek prefix xero-, meaning ‘dry’. The utility then began to formally define the main principles of xeriscaping for members of the Denver community interested in modifying gardening practices to save water. The results were the Seven Principles of Xeriscaping, listed below.

THE SEVEN PRINCIPLES OF XERISCAPING
1. Sound landscape planning and design.
2. Limitation of turf/lawn to appropriate, functional areas.
3. Use of water efficient plants.
4. Efficient irrigation.
5. Soil amendments.
6. Use of mulches.
7. Appropriate landscape maintenance.

Let’s review them and apply some up-to-date gardening information.

1. “Sound landscape planning and design” – the ideal starting point for all gardens, “Right Plant, Right Place.” This principle earns a GP thumbs-up.


2. “Limitation of turf/lawn to appropriate, functional areas” – turf has a place in the landscape but perhaps not everywhere or in every landscape. “Right Plant, Right Place” (hmm, that sounds familiar). Another GP thumbs-up.

CC

3. “Use of water efficient plants” – it may be stating the obvious but you want water efficient plants that work in your grow zone or micro-climate. Do some homework and choose plants that will be happy in your region. We’ll give this one a GP “OK” with a few points lost for being vague.

Photo by Halawa Xeriscape Garden


4. “Efficient irrigation” – this one has always been a puzzler. Perhaps it was included for folks who can’t break the habit of watering their gardens. The goal of xeriscaping is to have a landscape that does well on the average precipitation of an area. Granted in times of drought some plants may need a good drink now and then and new plants may need help getting established. But for the most part watering should be at a minimum and at the correct time, seasonally as well as weekly or monthly. Don’t forget to include any natural slope and drainage in your efficient irrigation plan. And “efficient” includes a correctly working automated system if you use one. This gets a GP “OK” as well.

CC

5. “Soil amendments” – We now know that amending the soil is not a recommended practice. It interferes with drainage, causes soil subsidence and is not conducive to root growth. Plants need to be planted in native soil, whatever it may be. This one gets a big “F” for Fail and shall be removed from our list.

CC


6. “Use of mulches” – if you’ve been following the Garden Professors blog you’ll know this is a winner. You also know that, ideally, we recommend using arborist chips but we also know that not everyone has access to them. Mulch choice also depends on the landscape site, plant choice and, in many instances, local codes. An organic mulch (but not bark) is usually the best bet, but there are times when an inorganic rock mulch is desirable. Do your homework and choose the best mulch for your situation. Mulch!
This xeriscape principal gets the GP Seal of Approval.

CC

7. “Appropriate landscape maintenance” – too often xeriscapes are advertised as “maintenance free”; this is false. Like all landscapes and gardens xeriscapes are an artificial environment and require maintenance to thrive. Established xeriscapes will, hopefully, need less maintenance but they do need care. This can include dealing with weeds, regular inspection and maintenance of an irrigation system, and regular plant husbandry items such as pruning and clean up. This gets a GP thumbs-up.

Image by Leubert/Creative Commons


So, based on the above discussion, here are The Garden Professor’s Principals of Xeriscape, Revised Version

THE SIX PRINCIPLES OF XERISCAPING
1. Sound landscape planning and design.
2. Limitation of turf/lawn to appropriate, functional areas.
3. Use of water efficient plants.
4. Efficient irrigation.
5. Use of mulches.
6. Appropriate landscape maintenance.

Looking over these principles we see no reason why they can’t be applied in every region and in every landscape. Learning to garden with what you have and where you are is the hallmark of a wise gardener.
Garden smarter, not harder.

Image by Susan Harris

Two new climate reports indicate what gardeners may expect in the future

In the past week, two new major climate reports have been released. One is the latest (6th) report from the Intergovernmental Panel on Climate Change (IPCC) and the other is the State of the Climate 2020 report. Of the two, the IPCC report has garnered a lot more press, but both are compilations of work by hundreds of scientists looking at recent weather and climate patterns and how they are affecting us here on earth. The IPCC report also provides projections of what the future climate might be like, using a number of assumptions about how the earth behaves, which can be difficult, and how humans respond, which is arguably even tougher to determine. In this post, there is no way that I can cover both sets of reports in meaningful detail and I won’t address how we need to address the rapidly changing climate here, but I do want to try to pull out some things that you can use as gardeners now. {Note, the pictures are ones I have taken myself on recent trips to use as eye candy!}

What do the new reports tell us?

The State of the Climate 2020 report, published jointly by NOAA and the American Meteorological Society, focuses on global climate events that happened in 2020. You can read some of the notable findings from the report at my blog. The report also discusses many of the “big” climate events of 2020 and puts them into historical context, including how frequently these extreme events occur and how the changing climate is making them more likely.

The United Nations’ IPCC 6th Assessment Report presents similar information but also makes more explicit the cause of the warming, which scientists have known for well over 100 years has been caused primarily by human emissions of greenhouse gases in the atmosphere that trap heat near the earth’s surface. The IPCC report makes it clear that the rapid pace of the warming will cause severe changes to the earth’s climate that will be difficult for humans and ecosystems to adapt to.

What do the conclusions of these reports mean for gardeners?

Here are some of the changes that we will have to adapt to in the future:

  • Rising temperatures across the globe—Temperatures are rising across nearly all the globe, both on land and in the oceans. Warmer temperatures mean warmer winters, hotter summers, and longer growing seasons. They also mean more increases in both evaporation from water surfaces and more evapotranspiration from plants, resulting in increases in water stress. That means you may need to water more often or use other techniques like mulch to preserve soil moisture. You may also need to switch to more heat-tolerant species as the USDA plant hardiness zones shift north (in the Northern Hemisphere). It may become harder to work in the middle of the day when it is the hottest.
  • Rising temperature leads to rising humidity levels, at least where there is a source of water vapor nearby. The higher humidity is contributing to higher night-time temperatures, which puts stress on animals living outdoors (pets, livestock, and wildlife) and also stresses some plant species. It can also lead to more clouds, which reduce direct sunlight and cool the air but also reduce solar radiation available for plants, slowing their development. You may have to manage your gardens for more diseases that are related to the high humidity levels.
  • Some areas like the northern US may see more rain, while others like the Southwest become increasingly dry. Year-to-year variability in precipitation is also likely to increase, with both more floods and more droughts. In both cases, water management of your gardens will become increasingly important, with the heavy rain events causing more erosion and the potential for loss of plants and trees from too much water and not enough air in the soil, and the longer dry spells making gardens more dependent on either drought-tolerant species or more frequent irrigation. You may have to put in rain gardens to help slow the movement of water through your gardens in heavy rain.
  • With the rising temperatures, frost and snow will become less likely but will still occur (there will still be winter!). This will allow you plant earlier than in previous decades but will still make the plants vulnerable to late-season frosts.
  • Increases in carbon dioxide may provide some fertilization of some plants, but only if there is enough water available for growth. Since some weedy species are more efficient at using carbon dioxide than other plants, you may need to deal with more weeds and invasive species in the future than you do now.
  • Strong storms like hurricanes and derechos may occur more often and be more damaging than the ones we are already seeing now. The research in this area is less definitive than that for rising temperatures because there are many different factors that go into storm development, but scientists generally agree that the number of hurricanes seems to be climbing upward and that the seasons are getting longer. In addition, the storms appear to be moving slower, and that is likely to lead to more rain from the storms over a specific area and more likelihood of rapid storm development. If you live in an area that is prone to strong thunderstorms or tropical cyclones, you may see them more often and the season may start earlier in the year. Rains and winds are likely to increase, leading to more tree damage and flattened plants.

Will we be able to see these changes over the next few years?

Year-to-year variations in climate will continue to plague gardeners, since whatever happened last year is unlikely to occur again this year. The climate naturally varies over time and space as well as exhibits these long-term changes. That means it can be hard to see the creeping trends in temperature and precipitation in the noise of yearly climate swings. If you are only worried about next year’s garden, what is happening in 50 years may not be of much interest. But if you care about your children’s gardens and their future on a warmer earth, than it is something these two reports make clear we have to think about and do something about.

Personal note: This week I was also invited to participate as an author on another upcoming large climate report, this one the 5th National Climate Assessment (NCA) that focuses on changing climate in the United States. I will be one of a number of authors contributing to the chapter on the Southeast US. If you are interested in what the content of that report includes, you can view the 4th National Climate Assessment, released in November 2018. There are chapters for each section of the country, but also chapters that deal with economic sectors like water and agriculture. The 5th NCA will update the information in the previous version as well as add additional information based on scientific studies completed since then.

References:

The State of the Climate report in a peer-reviewed series published annually as a special supplement to the Bulletin of the American Meteorological Society. The journal makes the full report openly available online, here. NCEI’s high-level overview report is also available online, here.

Sixth Assessment Report, Climate Change 2021: The Physical Science Basis is now out.  The report addresses the most up-to-date physical understanding of the climate system and climate change, bringing together the latest advances in climate science, and combining multiple lines of evidence from paleoclimate, observations, process understanding, and global and regional climate simulations. Get more information including links to the press release and some videos here.

Garden Logic – understanding correlation and causation in our gardens and landscapes

This home landscape is managed using science-based methods; the only routine additions are water and arborist chip mulches.

Upon reading this post’s title, you may be inclined to stop right there. (That’s why I have an eye-catching photo to lure you in.) While logic may seem irrelevant to your enjoyment of gardening, I can guarantee that reading this blog post will challenge many seemingly logical assumptions you’ve heard or read about. Recognizing unsubstantiated assumptions and avoiding their pitfalls means you can make wise choices about how you care for your gardens and landscapes.

You can find this and thousands of other silly correlations at www.tylervigen.com

A few definitions are needed before we get started:

Correlation refers to variables whose changes mirror one another. For instance, the addition of nitrogen fertilizer to container plants is correlated to plant growth: as nitrogen levels increase so does plant growth. You can also have inverse correlation, where the variables move in opposite directions. An example is water availability in soil and planting density: the more plants you have in a specified area, the less water is in the soil.

Plant growth is correlated with increased nitrogen and other nutrients (from Xu et al. 2020)

Causation takes correlation one step further: it establishes that one of those variables is causing the change in the other. Using the same examples, we know through published evidence that the increase in nitrogen is causing the increase in plant growth, and the increase in planting density is causing the decrease in soil water because of competing roots. These relationships are obvious to us, but what’s important is that these causative effects have been established through scientific experiments.

Inverse relationship between planting density and soil water content (from Shao et al. 2018)

Sometimes scientific evidence doesn’t exist to demonstrate causation. That may be because it’s impractical or impossible to run an experiment that tests for a causative effect, or it may be because the experiments just haven’t been conducted yet. The latter is the unfortunate reality for those of us interested in managing gardens and landscapes: there is no major funding agency that supports field research for us. There is research being done, but it’s on a small scale with a shoestring budget…so the body of literature develops very slowly. In such situations, we must rely on established applied plant physiology and soil science to ask whether a suggested correlation might be elevated to causation.

Something caused these arborvitae to fail…but what? Research is slow to catch up to our observations of landscape failures.

Which brings me to my current source of online irritation: the constant blaming of tree failure on mulch volcanoes. Yes, tree failure is definitely correlated with mulch volcanoes – because lots and lots of newly planted trees fail. But is the mulch to blame? No one seems to care much that there is NO published work to show that mounds of appropriate mulch materials will somehow kill otherwise healthy trees. Instead, observers jump to the conclusion that thick layers of wood chip mulch kill trees. They are elevating correlation to causation in the absence of either experimental research OR known plant physiology. In fact, there is published research to show that thick layers of arborist wood chip mulch enhance tree establishment and survival. And there are many poor planting practices that increase the likelihood of tree failure. But it’s easiest to blame the wood chip mulch, though it’s merely masking a multitude of planting sins.

  • Street volcano 1
  • Street volcano 2
  • Volcano as garden fashion statement
Volcano mulching is ugly – but does it cause tree failure? Or is it hiding something?

Not interested in mulch volcanoes? Well, there are lots of other examples of garden and landscape management practices or phenomena that fall into the logical fallacy camp. I’ve linked to appropriate references, when available, that go into more detail:

All of these products, practices or phenomena are correlated with some anecdotal observation (increased yield, healthier soil, plant failure, etc.) that elevates them to causative relationships. But no science.

I’d encourage you to think objectively about your closely held beliefs about your gardens or landscapes. Are you sure that what you’re doing is actually beneficial? How do you know there’s a cause-and-effect relationship? I’m not going to talk you out of your cherished beliefs – but if you are a science-based gardener, you might talk yourself out of them instead.

Willow screams in pain
What is its source of anguish?
More research needed!

Counting the Days to Maturity: Calculating planting dates for fall vegetables

While most of the US is still seeing sweltering hot temps, the cool temps of fall and winter aren’t really all that far away for those of us unlucky (or lucky) enough to not live in a tropical climate.  The tomatoes, peppers, cucumbers, and other warm-season crops planted back at the beginning of summer are still puttering along, even if they might be getting a little long in the tooth and starting to look a little worse for wear ( especially if disease has ravaged them).  For those who aren’t quite done with gardening for the year or who want to reap the bounty of fall crops and get the most out of their production space, fall gardening can be a great tool to extend the garden season.  But knowing when to plant what is tricky, especially when we are talking about different weather patterns and frost dates all around the country.  So a bit of weather data, info from the seed packet or label, a touch of math, and a calendar can be great tools to figure out when you can plant no matter where you are.  Of course if you do live in one of those warmer tropical areas your planting calendar is kind of turned on its head from what us more northern gardeners face. You may prefer to time your planting to avoid high heat. 

The first thing to think about is what you can plant.  Cool-season crops such as the Cole crops (cabbage, kale, broccoli, etc.), leafy greens (lettuce, spinach, Bok choi, etc.), root crops (radishes, beets, turnips, scallions), and some cool weather loving herbs like cilantro and parsley are all par for the course for a garden going into cooler fall and winter temps.  Depending on when you have extra space in your garden to plant and how long your growing season is you can often sneak in a late planting of fast-growing warm season crops to mature before the last frost.  Beans, cucumbers, and summer squash all have varieties that are fast maturing and can be started mid-summer for an early fall harvest.  Unfortunately, as of this writing the window for those warm-season crops has passed for me, but others in warmer zones may still have time. 

One question I get asked often is whether you should start indoors or out. I always tell folks that for things normally direct-seeded, like beans or lettuce, sow as normal. For things that are normally started indoors, the choice is yours. Cole crops are started indoors in spring because they need warmer temps to germinate. Since it is hot outside, you won’t need to grow them indoors for the heat (though it may be too hot outdoors if temps are over 85). You can start them in containers in a protected area outdoors instead of trying indoors. Theoretically you could direct seed them into the garden, but management is difficult to keep them watered, weed-free, and alive out there in the cruel garden world.

To know what you can plant and when, the first bit of info you’ll need is from the seed packet or label (or do some research if you know the cultivar/variety).  You’ll want to know the “days to maturity”, which is an estimate of how long it will take to go from seed (or transplant) to edible crop.  For those warm season crops, you might want to shop around because those days to maturity can be wildly variable – you can find beans that mature in 60-65 days and some that take 100+.  You’ll want to choose faster maturing varieties. 

Assuming that you’ll want a harvest window longer than a day and given that plant growth slows down as temperature cools (respiration is temperature dependent so plant processes slow down as temperatures drop), you’ll want to add a few weeks to the maturity days to take that into account.  This should be sufficient for cool season crops that will survive well past the first frost and freeze dates.  The aim for cool season crops is to get them close to a mature size before cold weather sets in since their growth will slow down at that point.  For warm season crops you’ll want to add a little more time to provide a cushion against frost which will kill the plants.  For info on killing temperatures of certain crops, check out my previous article here. 

Graphical user interface, text, application, email Description automatically generated

For example, if I wanted to plant Asian Delight Bok choi (I fell in love with it when I trialed it for the All-America Selections program) I’d see on the packet that it has an average maturity time of 37 days (which is pretty damn fast).  My math would be:

37 days (to maturity) + 14 days (harvest period) + 14 days (fall factor) = 65 days

Next, you’ll need to know a bit of weather data – more specifically the expected date of your first frost/freeze.  You can find this on the website of your local National Weather Service office, or get an idea from the map below. (This data is usually updated every decade or so – you’ll want to check it every few years for updates as the dates have been changing due to climate change.) The date ranges given are usually a median, meaning that half of the frost days fall before and half fall after the given dates.  Keep that in mind – sometimes frost will come earlier or be much later.

I live in Omaha, Nebraska so our median frost date (according to the map) is Oct 10.  Now I know that I need to plant my Asian Delight Bok choi 65 days before Oct 10.  I can grab a calendar and count backward from October 10 (or I can cheat and use an online date calculator like this one) and see that the suggested planting date is August 6.  Since I missed it by a week I can decide if I want to gamble a little and still plant since I know that it could very well frost later than Oct 10 and that the Bok choi will survive much later into the season anyway.  But it gives me an idea of what to expect. 

Had I wanted to plant something like beans for a late crop, my calculation would have definitely shown me that it was too late, letting me know that I shouldn’t waste my time.  For example, Blue Lake beans take around 55-60 days to mature (almost twice as long as my Bok choi), plus I need to add that extra 14 days for the frost factor meaning that I would have had to plant 97 days before first frost, which would have been in early July for me. 

You can extend the time you have for growing fall crops by using season extension techniques like row covers, low tunnels, cloches, etc.  For row covers, the materials you buy such as the spun fabric row cover will offer a certain number of degrees of protection.  For example, a medium weight row cover might offer 8 degrees of protection, meaning it will be 8 degrees warmer under the cover than the air temp.  Keep those in mind when planning your fall garden.  Perhaps we’ll have to talk about those in another article soon. 

Sources:

Fall Gardening (Nebraska Extension)

Fall Vegetable Gardening (Virginia Cooperative Extension)

Fall Frost Info (Weather.gov)

Diagnosing Abiotic Disorders II

In this blog I continue to examine maladies caused by environmental conditions in the absence of a disease agent or insect.

Salt affected plants show damage to older leaves starting from the edge of the leaf and moving inward.

Salinity
Salt in soils or water is simply the presence of too many soluble ions in the soil-water solution. This tends to happen in dry climates where evaporation rates exceed precipitation rates. In these climates salts accumulate in soil when surface waters pick up minerals from soil that is high in precipitated salts. In wetter climates water leaches salts from soil so surface waters (rivers and lakes) have fewer dissolved salts. Also, in dry climates irrigation is often a must and irrigation sources usually have high amounts of dissolved salts. In high salt environments plants must use energy to increase their own salt balance at the root interface to make uptake of fresh water through their membranes possible. This energy is thus not available for growth. Salt affected plants are often smaller, even stunted depending on salinity levels and are more susceptible to root pathogens as their roots are more likely to be “leaky” giving pathogens chemical signals of their susceptibility.  Salt damaged leaves often show “edge” necrosis or burning on the oldest leaves.

Salt affected soils should not be allowed to dry out as roots will be damaged. Leaching to dissolve salts and move them below the root zone is one approach to prevent further symptoms.

In this soil salts have precipitated on the soil surface because evaporation exceeds precipitation

Soil compaction
Soil compaction is the increase in soil bulk density beyond a point where roots function and grow. Bulk density is a measure of soil compactness and is calculated as the weight of dry soil per volume. Optimal and harmful bulk densities vary by soil texture. Sands have higher bulk densities than loams which are higher than clays in their growing range. Normal bulk density for a sand will be a compacted value for a clay. Values above 1.1, 1.4 and 1.6 g/cm3 can be restrictive for roots growing clays, loams and sands respectively. Compacted soils of any texture restrict plant growth. Stunting, poor growth and nutrient deficiencies due to loss of root function are common.

Compacted soils do not drain well and do not infiltrate (take in water) easily. Even small tree wells such as this one Kiev, Ukraine will not drain if soils are physically compacted by driving over them

Extremes of light
Light is necessary for photosynthesis but it is also a radiation source that can include damaging light energy when it reaches tissues that are not accustomed to it. This happens frequently on over-pruned or damaged trees, where the canopy is suddenly reduced and stem tissues receive intense sunlight. On thin or green barked trees this can cause sun scald. Apples are particularly sensitive and will develop large cankers on upper branch surfaces if too much light is allowed into the canopy during summer. Canopy loss compounds light injury because the tree is not cooling itself as efficiently with fewer leaves. Infrared energy (heat) builds up on branch surfaces and can kill underlying stem cambium layers.

Extreme light during drought can cause damage to stems and leaves. the damage is often centered in the middle of the lamina (leaf blade) or along exposed stems with green bark

Low light levels also harm plant productivity. All trees tend to lose interior branches as normal growth increases canopy density and light levels decrease in the innermost canopy. Inner branches store less and less energy and essentially die due to light starvation. The same thing can happen to entire trees if they are overgrown by vines, other trees or shaded by buildings. While canopy thinning will preserve inner branches, it is not absolutely necessary as branch dieback is a natural process in most trees.

Effects of Herbicides  Sometimes herbicides cause damage to non target plants.  This happens when herbicides are applied unknowingly, such as residues in composts, drift from off-site applications, or by choosing the wrong herbicide to use in a garden setting.  Herbicides affect plants in different ways: some only affect tissues they contact, others are systemic, and some affect seeds as pre-emergent herbicides and have activity in soil over time.  Diagnosing herbicide damage often requires sleuthing and inquiry of what has happened in the past and what materials your neighbors may be applying.  As with any pesticide, herbicides should be applied according to label instructions. 

Glyphosate the active ingredient in Roundup herbicide causes stunting and distortion of rose leaves. The symptoms can persist for many years.
In conclusion…Disease diagnosis can be a challenge for the gardener and dysfunctions caused by abiotic factors are no different. Carefully considering the symptoms that the plant presents is the first step to recognizing an abiotic disorder. Uniformity of symptoms is often indicative of disorders not caused by biotic pathogens. As with any plant health issue, figuring out the cause is the first step in helping plants succeed.
 
 
 


References

Costello, L., Perry, EJ, Matheny, NP, Henry, MJ, and PM Geisel. 2003. Abiotic Disorders of landscape plants a diagnostic guide. ANR publication 3420 University of California, Communication Services, Oakland CA.

Manion, P. 1981. Tree Disease Concepts. Prentice-Hall Inc., 399pp.

Heat domes, wet spells, and the weather patterns that tie them together

Do you have a favorite kind of weather that you love to experience? For me, it’s the first warm evening of spring, when the air is just warm enough and the wind just strong enough for the air to feel as though it is dripping off my fingers. On nights like that, I can tell that the air really is a fluid, the topic of this week’s blog.

The wind of spring, Toshihiro Oimatsu via Commons Wikimedia

What causes atmospheric weather patterns?

You may have noticed this year that the weather patterns across both the United States and Europe have been very persistent. That has led to the occurrence of record-setting high temperatures in some locations like the Pacific Northwest and the central US and southern Europe as well as day after day of rain in the Southeastern US. Both of these weather patterns have caused no end of grief for gardeners and farmers, since weather is seldom stuck on day after day of “perfect” conditions (even if you could define what those are).

To understand how weather patterns get stuck, it helps to know how the air moves through the atmosphere. Wind is driven by differences in heating between two areas. That contrast leads to differences in density and pressure between the areas, and the air flows from higher pressure to lower pressure to try to equalize the amount of air between those areas. The large-scale weather patterns across the globe are caused by differences in the sun heating the spherical earth at the equator and at the poles at different angles due to latitude. There are also smaller-scale wind circulations due to differences in heating between land and water (oceans or lakes) that cause the same movement of air molecules. The earth is not uniform, with continents in some areas and oceans in others and has mountain ranges that also divert the flow of air. The earth is also rotating, and that makes the wind appear to be turning towards the right in the Northern Hemisphere (left in the Southern Hemisphere), which we call the “Coriolis force.” Friction can also slow down the wind and cause it to change direction near the earth’s surface, which adds to the calculation.

Atmospheric waves

The net result of all these forces acting on the air are a series of atmospheric waves of high and low pressure around the earth that control where the weather goes (these are known as Rossby waves after the great meteorologist Carl-Gustav Rossby). A great website to view these waves is at https://earth.nullschool.net/, with a dynamic view of the air flowing around the earth. You can move the earth around with your mouse by clicking and dragging it, and you can change the size by pinching and dragging on your touchscreen if you don’t have a mouse with a wheel. If you click on “earth” on the bottom left of their map, it pulls up a menu that allows you to pick different heights in the atmosphere (1000 mb is closest to the surface, 500 mb is about halfway up in the atmosphere, and 250 mb (shown in this figure from July 29, 2021) is roughly the height that jets fly.

The image shows areas of strong winds (in red) and weak winds (in blue). The strong winds at 250 mb are called “jet streams”, and they push weather systems around. The strong jet stream over the upper Great Lakes in this image helps explain why the severe weather that moved through Wisconsin on July 29 moved from northwest to southeast. The jet streams outline the atmospheric waves that control the large-scale weather patterns. In the Northern Hemisphere, winds blow clockwise around areas of high pressure (“ridges”) and counterclockwise around low pressure (“troughs”). It is much easier to see on the website than on this static image, although traditional weather maps usually show the wind direction using arrows to help. As the image shows, often a ridge in one half of the continent is accompanied by a trough in the other half just like an ocean wave.

The large-scale weather patterns that are connected to atmospheric waves are constantly shifting as the air in the atmosphere tries to balance out all the forces that are pushing it around. (This 30-second video shows how the waves typically evolve over time.) Often the waves move, usually from west to east in the mid-latitudes, and so the weather at those latitudes also tends to move from west to east. But sometimes the weather patterns get stuck in one spot, and cause day after day of the same weather. We call these “blocking” patterns because they block the natural movement of the waves, locking the weather pattern in place for long periods. That is what we have seen this summer, with a very strong high-pressure center locked over the western U. S. and a trough of low pressure draped over the eastern U. S. for much of the last few months. In summer, high pressure usually causes sinking air, lack of clouds, warm temperatures, light winds, and no rain. In contrast, low pressure leads to rising air that forms clouds and rain and cooler temperatures due to the clouds.

What is happening this summer?

The blocking this summer has been more persistent than usual, with strong high pressure in the west causing a very hot and dry area to form (sometimes called a “heat dome”). Once you get a strong high like that to form, it can get anchored in place by the dry conditions and high temperatures at the surface, making it very hard to move. The length of time that this summer’s high has lasted has contributed to the string of record-setting temperatures and lack of rain and subsequent drought that region has experienced this year. By contrast, in the Southeast, low pressure has led to a stubborn low-pressure trough that has brought rain to the region almost every day, preventing farmers from doing field work or drying hay and increasing the occurrence of fungal diseases on their crops. If you know you are in a blocking pattern, that means you should prepare to experience the same weather for protracted periods of time and adjust your gardening schedule to accommodate the weather you are likely to see for the next week.

River meander, outside of Kobuk Valley National Park, National Park Service

How will atmospheric patterns change in the future?

Some but not all atmospheric scientists think that as the earth gets warmer, the temperature difference between the equator and the poles will decrease and that this will lead to atmospheric wave patterns that are loopier, like winding rivers in an almost flat coastal plain. This could lead to both more extreme weather and potentially, more frequent blocking patterns. Gardeners need to prepare by designing their gardens to handle both more extremes of weather, including heat waves and floods, and periods of more persistent weather, which could lead to more frequent and longer droughts. That means making sure that you need to have good drainage for high-intensity rainfall events but also need to use methods like mulching with arborist chips to preserve the moisture in the soil for those times when no rain is in the forecast for extended periods.

Backyard biocontrol – using natural enemies to wipe out invasive weeds

The agricultural-residential interface

Four years ago we moved to the family farm (where I grew up) and we’ve enjoyed restoring the 1 acre landscape around the farmhouse. Given that the residential part of this farm is surrounded by pastureland, there is a continual influx of weed seeds into our managed beds. While our thick applications of arborist wood chips have kept out many weeds, they still pop up where mulch hasn’t been applied yet or is too thin.

Hold a stem of Hypericum perforatum up to the sky to see tiny perforations in the leaves

Photosensitized livestock will suffer severe sunburning after consuming Hypericum perforatum

One of these weeds is Hypericum perforatum (also known as Klamath weed or St. John’s wort), a species native to Eurasia. The latter common name can confuse gardeners, as there are several ornamental species of Hypericum also called St. John’s wort, but H. perforatum is easily identified by the perforations in the leaf. This invasive species is a problem for our cattle, as Klamath weed causes photosensitivity when it’s consumed and can be toxic in large amounts.

The weeds to the right of my raised beds include St. John’s wort, or Hypericum perforatum.

In the last few years H. perforatum colonized our stockpile of native soil waiting to be used in our raised beds. It was a small enough infestation that we could pull it all up, but a closer look revealed that some shiny metallic beetles were already busy feasting on the leaves. Putting on my IPM hat, I first needed to identify these interesting beetles. It didn’t take long to find out they were a Chrysolina species.

Chrysolina spp. beetles on St. John’s wort

Chrysolina hyperici and C. quadrigemina (or St. John’s wort beetles) are also native to Eurasia and are specialist feeders – they only feed on Hypericum species. They were imported as biological control agents several decades ago and have been effective in controlling dense populations of St. John’s wort. C. quadrigemina in particular has been reported to feed on both ornamental and native species of Hypericum but not to the extent of causing significant damage.

  • Hypericum perforatum flower
  • Ornamental Hypericum flower
  • Ornamental Hypericum shrub
Ornamental St. John’s wort is Hypericum on steriods

Both species of the St. John’s wort beetle feed on the leaves, where they also lay thousands of eggs. The larvae that emerge from the eggs are voracious feeders and can defoliate dense stands of St. John’s wort. Like other animals that eat Hypericum perforatum, the larvae become photosensitive and generally feed before sunrise to avoid damage.

Hypericum perforatum infestation

Since biological control agents depend on the presence of their host, it’s important to retain a small population of the host. And because this particular beetle is a leaf feeder, one can remove the flowers of the plants to reduce reproduction, but maintain the plants to support the beetle.

Cinnabar moth (Tyria jacobaeae) was introduced to the US to help control tansy ragwort (Jacobaea vulgaris), another invasive, noxious weed

Many other introduced, invasive weeds can be controlled using carefully researched microbes and insects. Some of these biocontrol agents may already be found in your area – so it’s important to avoid using insecticides and fungicides, in particular, to conserve these garden assets.